Tech Tip: Installing the SMA Cluster Controller

Tech Tip: Installing the SMA Cluster Controller

SMA’s Cluster Controller is a data logging and plant management device that can handle up to 75 inverters. Don’t let that impressive statistic scare you away; the Cluster Controller is easy to install and commission, as Solar Academy’s Mike Mahon demonstrates in our latest Tech Tip.

Have a question for the Solar Academy trainers? Send it to socialmedia@sma-america.com and we might just answer your question in our next Tech Tip! 

This article was published in 2014. As we are constantly developing our solutions, there may be newer or additional options for the tips and techniques in this article.

9 Comments
  1. Jason
    Jason says:

    The video says “for use with more than 4 inverters”.
    If three of those were Sunny Tripower 20000-US models, could you then use 2 Sunny Island 6048s at 240V, or would it have to be three SIs (at 120v?)
    Is 208V an option with the SIs?
    This would be using a transformer to bring the Tripowers 480/277 down to 3 lines of 120 or 240.
    Thanks.

    Reply
  2. Brian
    Brian says:

    Hi, good day. we have about 10 STP-25000TL-30 installed around our campus. we are planning to integrate them to our local network using VLAN for monitoring purposes. is it possible to connect the inverters via webconnect module to a manageable network switch? thank you.

    Reply
  3. Oudaya
    Oudaya says:

    I connected SMA cluster controller to Sunny boy SMA 2.5 but it cannot transfer data and show in the display of Cluster controller. Do I need to change or set any parameters?

    Reply

Trackbacks & Pingbacks

  1. […] 5. Tech Tip: Installing the SMA Cluster Controller – Sunny. SMA … […]

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>